Mazda 6 Manual page 366

Interior Features
Bluetooth®
6. When the pairing is completed,
PAIR SUCCESS are displayed after
about 10-30 seconds, after which
PAIR SUCCESS continues to be
displayed for three seconds, and then
the unit returns to the normal display.
NOTE
If pairing cannot be completed, try "1234"
l
instead. Refer to the owner's manual of
your mobile device for the right PIN code.
®
Some Bluetooth
l
certain amount of time before the
is displayed.
If the pairing failed, "Err" flashes for three
l
seconds.
Pairing cannot be performed while the
l
vehicle is moving. If you attempt to perform
pairing while the vehicle is moving, "PAIR
DISABLE" is displayed .
If seven Bluetooth
l
already been paired to the vehicle, pairing
cannot be performed and "MEMORY
FULL" is displayed. Delete one paired
device to pair another one.
Device selection
If several devices have been paired, the
®
Bluetooth unit links the device last
paired. If you would like to link a
different paired device, it is necessary to
change the link. The order of device
priority after the link has been changed is
maintained even when the ignition is
switched off.
1. Using the audio control dial, select the
link change mode LINK CHANGE
in the BT SETUP mode. (Refer to
®
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
5-78
audio devices need a
symbol
®
audio devices have
and 3. The name of the currently linked
Bluetooth
If no Bluetooth
currently linked, the name of the first
device among the paired devices is
displayed.
4. Turn the audio control dial to select the
name of the device you would like to
link.
5. Press the audio control dial to select the
device you would like to link. The
symbol disappears, and PAIRING
flashes in the audio display.
NOTE
When "GO BACK" is selected and the audio
control dial is pressed, the display returns to
"LINK CHANGE".
®
audio device is displayed.
®
audio device is
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7