Mazda 6 Manual page 360

Interior Features
Bluetooth®
1. Activate the Bluetooth
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say:[Beep] Setup
4. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
5. Say:[Beep] Pairing options
6. Prompt: Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.
7. Say:[Beep] Pair
8. Prompt: Start the pairing process on
®
your Bluetooth
code is 0000 (XXXX). Input this on
®
your Bluetooth
prompted on the device. See device
manual for instructions.
9. Using the device, perform a search for
®
the Bluetooth
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select Mazda from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: Please say the name of the
device after the beep.
5-72
®
application of
device. Your pairing
device when
device (Peripheral
13. Say:[Beep] XXXX - - - (Say a
device tag , an arbitrary name for
the device.) Example: Stan's device.
NOTE
Say a paired "device tag" within 10 seconds.
If more than two devices are to be paired, they
cannot be paired with the same or similar
"device tag".
14. Prompt: XXXXXX - - - (Ex. Stan's
device ) (Device tag). Is this
correct?
15. Say: [Beep] Yes
16. Prompt: Pairing complete
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth
or by activating Bluetooth
first after switching the ignition from OFF
to ACC, the system reads out a voice
guidance, XXXXXX - - - (Ex. Stan's
device ) (Device tag) is connected .
NOTE
When the pairing is completed, the
l
symbol is displayed.
®
Some Bluetooth
l
certain amount of time before the
is displayed.
Device registration can also be done by
l
operating the audio unit.
Depending on the device, the registration
l
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
Registered device read-out
®
Bluetooth Hands-Free can read-out the
devices registered to its system.
®
Hands-Free again,
®
Hands-Free
audio devices need a
symbol