VDO MC 2.0 WR Instruction Manual page 52

DE ENG FR IT ES
WHEEL SIZE--BIKE 1 or BIKE 2 is shown on the
display.
Press ALTI A
Confirm the selection by pressing
WHEEL SIZE--MANUAL SET or TYRE SELECT is
shown on the display.
Press ALTI A
TYRE SELECT list.
Confirm the selection by pressing
If MANUAL SeT is selected:
The tyre size in mm flashes (if MPH is selected, the
size is displayed in inches). Press ALTI
the tyre circumference or
Once you have set the correct tyre circumference,
press M to confirm your setting.
BIKE 1 (or BIKE 2) SET OK? is shown on the display.
Press M in confirmation or C to make a correction.
The MC 2.0 confirms by displaying WHEEL SIZE--SET DONE.
52 MC 2.0 WR
NL PL
or P to select BIKE 1 or BIKE 2.
.
M
or P to select MANUAL SET or
M .
A to reduce
to increase it.
P
VDO CYCLECOMPUTING
If TYRe SeLeCT is selected:
Press ALTI A
Once your tyre type is displayed (e.g. 700 x 23 C)
confirm it by pressing
700 x 23 C--SELECT OK? is shown on the display.
Press M to confirm the selection or
The MC 2.0 confirms by displaying WHEEL SIZE--
SET DONE.
To exit settings mode, press and hold the
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
or P to scroll through the tyre list.
M .
C to change it.
C button for three seconds.