Components
ECM01660
NOTICE
Do not use the tilt support bar when
trailering the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the
tilt position.
EMU26382
Top cowling lock lever (pull up type)
To remove the engine top cowling, pull up
the lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock
the cowling by moving the lever(s) down-
ward.
1. Top cowling lock lever(s)
21
ZMU02674
1. Top cowling lock lever(s)
EMU26450
Carrying handle
A carrying handle is provided on the rear of
the outboard motor. It enables you to carry
the outboard motor easily with one hand.
1. Carrying handle
1
ZMU02675
ZMU04522
1
ZMU02676