6.
Prepare the engine for starting. For fur-
ther information, see page 30. Be sure
the engine is in neutral and that the clip
is attached to the engine shut-off switch.
7.
Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope several turns
around the flywheel clockwise.
8.
Pull the rope slowly until resistance is
felt.
9.
Give a strong pull straight out to crank
ZMU02721
N
ZMU02682
ZMU02683
Trouble Recovery
and start the engine. Repeat if neces-
sary.
EMU33501
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
ZMU02722
[ECM00401]
62