Yamaha F4A Owner's Manual page 43

2. Tighten the steering friction adjuster by
turning it clockwise to prevent the motor
from turning freely.
3. Tighten the air vent screw.
4. Close the fuel cock.
N
ZMU02682
ZMU02696
5. Tilt support bar equipped models: Hold
the rear of the top cowling or the carrying
handle (if equipped) with one hand and
tilt the outboard motor up fully until the
tilt support bar automatically locks.
6. Tilt support knob equipped models: Hold
the rear of the top cowling with one
hand, fully tilt the outboard motor up,
and push the tilt support knob into the
clamp bracket.
7. Tilt support lever equipped models: Hold
the carrying handle and tilt the engine up
fully until the tilt support lever automati-
cally locks.
TIP:
Tilt support lever/bar equipped models: If the
motor is not facing forward, the tilt support le-
ver/bar cannot automatically turn to the
locked position. If the tilt support lever/bar
does not automatically lock, swing the motor
a little to the left and right.
Operation
ZMU02660
ZMU02694
38