Table of Contents
Advertisement
38
Lubrication of the rear drive box
(fig. 26)
Checking the oil level
Every 3000 km (2000 miles), check that the oil level
is nearly skimming top level cap ccA»
.
If lower, top
up with oil of same quality and density.
Oil change
Every 10.000 km (6000 miles) or so, change the oil
in the rear drive box.
Do this on a warm engine as the oil is more easily
drained.
26
Let the old oil drain completely before adding fresh
one.
ccA»
Level plug.
«8»
Filler plug.
«G» Drain plug.
Quantity required: abt. 0.250 I of which 0.230 I
(3/~
pints) of Agip Rotra MP SAE 80
W/90
and 0.020 I
(approx.
3
/
4
oz.) of Agip Rocol ASO/R.
Front fork lubrication
(fig. 27)
To replace the oil in the front fork legs, proceed as
follows:
•
with the bike on the central stand, loosen the
side screw «G» locking the steering head to the
fork arm; disconnect compensating pipe and com-
pletely unscrew the hexagonal screw plug «8»;
then undo drain plug «A»;
•
slightly press the front part of the bike to force
out the plug «8» which is solidal to the shock ab-
sorber.
•
refit plug «A» and introduce the quality of fluid
necessary (60 cc Agip F.1 ATF Dexron) through the
space existing between the inner diameter of the
fork arm and the shock absorber body;
•
release the front part of the bike, refit plug «8»
and lock the side screw. Repeat the same opera-
Hide quick links:
Advertisement
Table of Contents
