Breville BOV845 Instruction Booklet page 29

Smart oven pro
Hide thumbs Also See for BOV845:
Table of Contents

Advertisement

TROuBLESHOOTINg
POSSIBLE PROBLEM
The 'preheat' alert sounds
at a lower temperature
than what is displayed on
the LCD screen.
The LCD screen
displays 'E01'
The LCD screen displays
'E02'
The LCD screen displays
'E03'
The LCD screen displays
'E04'
The LCD screen displays
'E05'
28
EASY SOLuTION
The 'preheat' alert sounds at 75% of the target temperature.
This provides the fastest, combined preheating and cooking
time.
This is because when the 'preheating' alert sounds, signaling
the user to open the oven door and insert food, there is dramatic
temperature loss inside the oven. If the alert sounded at 100% of
the target temperature, opening the door would mean a lot of this
waiting time is "wasted". We have calculated that by sounding
the alert at 75% of the target temperature, followed by the oven
door being opened to place food inside the oven, that we still
recover to the target temperature up to 2 minutes faster. This
is why the temperature on the LCD screen does not match the
target temperature at the 'preheat' alert. In total, it takes the oven
approximately 8–10 minutes from start-up, including opening
the oven door when the 'preheat' alert sounds, to reach the target
temperature. To ensure the fastest heat up time, the Breville oven
uses the maximum allowable power from the outlet (1500W for
baking, 2400W for toasting).
The LCD screen will display 'E01' when there is a non-resettable
issue with the appliance. Should this occur, immediately remove
the power cord from the power outlet and call Breville Customer
Service.
The LCD screen will display 'E02' when there is a non-resettable
issue with the appliance. Should this occur, immediately remove
the power cord from the power outlet and call Breville Customer
Service.
The LCD screen will display 'E03' if the oven temperature is
above the set maximum limit. Remove the plug from the power
outlet, allow the oven to cool for 15 minutes, then plug back in.
Call Breville Customer Service if the 'E03' message continues.
The LCD screen will display 'E04' if the room temperature is
below the set minimum. Unplug the oven and relocate to a
warmer area.
The LCD screen will display 'E05' when there is a non-resettable
issue with the appliance. Should this occur, immediately remove
the power cord from the power outlet and call Breville Customer
Service.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents