Appliance Dimensions; Unpacking The Appliance; Packing Material Disposal; Remove Transport Bolts - Dometic WDCVLW Installation Instructions And User Manual

Washer/dryer combo
Hide thumbs Also See for WDCVLW:
Table of Contents

Advertisement

INSTALLATION REQUIREMENTS
● To minimize possible shock hazard, the power
cord MUST be plugged into a 3-prong, grounding
type outlet that is grounded in accordance with
local codes and ordinances. If a 3-prong outlet is
NOT available, it is the responsibility and obliga-
tion of the user to have the properly grounded
outlet installed by a qualified electrician.
● If local codes permit the use of a separate ground
wire, it is necessary that a qualified electrician
determine that the ground path is adequate.
● DO NOT ground the appliance to a gas hose.
● Consult a qualified electrician if you are unsure
whether the appliance is properly grounded.
● DO NOT use a fuse in the neutral or ground
circuit.
E.

Appliance Dimensions

FIG. 1
36
"
(1030
mm
)
FIG. 2
The dimensions shown are for minimal spacing using a
custom under-counter installation.
FIG. 1
1
/
23
"
2
(595
mm
)
33
1
/
"
2
mm
(850
)
F.

Unpacking the Appliance

● After unpacking, check the appliance for any
damage that may have occurred during transport.
● Instructions for unpacking the appliance from
the carton are located on the top of the transport
carton.
● Ensure that all included items are undamaged. If
any part of the appliance incurred damage during
transport, file a damage claim with the shipping
company.
G.

Packing Material Disposal

WARNING! Risk of serious injury or death due
to suffocation. The packing materials of this machine
may be dangerous to children. Please dispose of them
properly, and keep out of reach of children.
● Do NOT throw the packing materials away with
the other daily trash. Dispose of these materials
according to the relevant local regulations.
H.

Remove Transport Bolts

● Before using this appliance, transport bolts MUST
be removed from the backside of this machine.
Complete the
following steps
to remove the
bolts:
1. Loosen all bolts
with a wrench
and
then
move them and
their sleeves.
2. Cover the holes
with transport hole plugs.
3. Keep the transport bolts for future use.
7
FIG. 3
re-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents