Reference Symbols Displayed On The Panel; Preparing For First Use; Laundering Fabrics - Dometic WDCVLW Installation Instructions And User Manual

OPERATING INSTRUCTIONS
D. Reference Symbols Displayed on the
Panel
Pre-wash Wash
E.

Preparing for First Use

● Before laundering clothes for the first time, the
laundering machine MUST run through the com-
plete cycle of procedures without fabric as follows:
1. Connect to a power source and water.
2. Put liquid detergent into the dispenser and
close it.
3. Press the "Power" button.
4. Press the "Start/Pause" button.
● The drawer is separated as follows:
● I: Pre-detergent
● II: Main detergent
● : Laundering additive, such as fabric soft-
ener
● Putting detergent into the appliance:
1. When using a Dometic or any other pod de-
tergent, place the pod in the drum with fab-
ric, or if using liquid detergent:
● Pull out the detergent dispenser.
● Pour liquid pre-detergent into Case I
(when necessary).
● Pour liquid detergent into Case II.
2. Pour laundering additives, such as fabric
softerner, into Case
3. Close the drawer securely.
NOTICE: Dilute liquid detergents or additives with
water before pouring it into the detergent dispenser
to prevent the inlet from being blocked and over-
flowing while filling with water.
F.

Laundering Fabrics

● Starting the appliance:
1. Load the clothes to be washed into the drum.
2. Add liquid detergent or any other approved
cleaning solvents in drawer (pods go in the
drum).
3. Press the "Power" button.
4. Select the desired cycles and options.
5. Press the "Start/Pause" button.
Rinse Spin Drying
(when necessary).
● Selecting the Wash Cycle:
1. Select the proper wash cycle.
2. Select the proper temperature according
to soil level. Higher temperatures consume
more power.
3. Select
higher
the
CAUTION! DO NOT attempt to open the door
while the appliance is running. Doing so may result
in personal injury or property damage. To load addi-
tional clothes into the dryer, press the Pause button
and wait for the door to unlock. The door will not un-
lock until all the water is drained from the appliance
and the internal temperature drops below 122°F.
Press Start only once the door is closed again. Over-
flowing water resulting from misuse of the appliance
may cause property damage.
13
the proper spin
the spin speed,
garments will be before
speed. The
the drier
drying.