Call Waiting; Temporary Ringer Silencing; Temporary Tone Dialing; Find Handset - VTech LS6195 User Manual

Call waiting

When you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are already on a call.
• Press FLASH on the handset or tap FLASH on the telephone base to put the
current call on hold and take the new call.
• Press FLASH on the handset or tap FLASH on the telephone base at any time
to switch back and forth between calls.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer without
disconnecting the call. The next call rings normally at the preset volume.
To silence the handset ringer:
• Press OFF or MUTE on the handset, then
displays briefly.
To silence the telephone base ringer:
• Tap MUTE on the telephone base.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call.
. During a call, press
. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end
the call.

Find handset

Use this feature to find the system handset.
To start paging:
Press /FIND HANDSET at the bottom of the
•
telephone base. The handset rings and displays
** Paging **.
To end paging:
• Press /FIND HANDSET at the bottom of the
telephone base.
-OR-
• Press , , OFF or any dialing key on the handset.
-OR-
• Place the handset in the telephone base.

Redial list

The handset stores the last 0 telephone numbers dialed. When there are already
0 entries, the oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list on the handset:
. Press REDIAL when the handset is not in use.
. Press , or REDIAL repeatedly until the desired entry displays.
3. Press or
To delete a redial entry on the handset:
When the desired redial entry displays, press DELETE.

Join a call in progress

You can use the telephone base and the cordless handset, or two cordless
handsets at a time on an outside call. You can buy additional expansion handsets
(LS6005/LS6005-13/LS6005-15/LS6005-16/LS6005-17) for this telephone base.
You can register up to five handsets to the telephone base.
• When a device is on a call, press
on the telephone base to join the call.
• To exit the call, press OFF on the handset or place it back in the telephone
base, or press
device hangs up.

Transfer a call

While on an outside call, you can transfer the call from one system device
to another.
To transfer a call from the handset:
. During a call, press MENU.
. Scroll to Transfer, then press SELECT.
• When you have more than one handset, use the dialing keys to enter a
destination device number (7 for the telephone base, or 1 to 5 for
HANDSET 1 to HANDSET 5).
3. To answer the call on the telephone base, press
-OR-
To answer the call on the handset, press
To transfer a call from the telephone base:
• Pick up the handset from the telephone base.
on the handset or
to dial.
on the telephone base. The call continues until the other
displays and Ringer muted
on the telephone base.
or on another cordless handset, or press
.
, or any dialing key.
6