Sony KD-28DL11U Operating Instructions Manual page 20

Advanced Operation
z
*When a programme has been set to
display, a symbol appears by that
programme's information in the EPG.
If you switch the TV to standby mode it
will automatically turn itself on when the
programme is about to start.
z
**Only for Smartlink compatible VCRs. If
your VCR is not Smartlink compatible a
message will be displayed to remind you
to set your VCR timer.
When a programme has been set to
record, a symbol appears by that
programme's information in the EPG.
Once a recording has begun you can
switch the TV to standby mode, but do
not switch off the TV completely or the
recording may be cancelled.
20
Advanced Operation
b) Reminder
This option allows you to set a future programme to be displayed automatically
on the TV screen when it starts.
1.
With the EPG on screen, press the V, v, B and b button to highlight the
future programme you wish to display.
2. Press the YELLOW button to display the 'Timer' menu.
3. Press the V or v button to highlight 'Reminder'.
4. Press the OK button to set the TV to automatically display the selected
programme when the programme starts*.
c) Manual timer REC
This option allows you to manually set the time and date of a future programme
you wish to record.
1.
With the EPG on screen, press the YELLOW button to display the 'Timer'
menu.
2.
Press the V or v button to highlight 'Manual timer REC'. Press the OK
button to display the 'Manual timer REC' menu.
3. Press the V or v button to select the date. Press the b button.
4. Press the V or v button to select the start time. Press the b button.
5. Press the V or v button to select the stop time. Press the b button.
6. Press the V or v button to select the channel. Press the OK button to set
the TV and your VCR timers**.
Cancelling a recording/reminder
The 'Timer' pop-up menu also has a 'Timer list' option that only appears when a
programme has been set to record/display. The 'Timer list' option allows you to
view a list of all programmes that have been set to record/display and to delete
any programmes.
1.
With the EPG on screen, press the YELLOW button to display the 'Timer'
menu.
2.
Press the V or v button to highlight 'Timer list'. Press the OK button to
display the 'Timer list'.
3.
Press the V or v button to highlight the programme you wish to delete.
Press the OK button to delete the programme.
4. A display appears to confirm that you wish to delete the programme.
5. Press the B button to highlight 'Yes'. Press the OK button to confirm.