Advertisement
Preparing for use
1
Place the appliance on a stable, horizontal and level surface.
Do not place the appliance on non-heat-resistant surfaces.
2
Place the removable mesh properly (Fig. 1).
3
Place the basket in the pan properly (Fig. 2).
4
Pull the mains cord out of the cord storage compartment in the bottom of the appliance.
Do not fill the pan with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and affects the hot air
frying result.
Using the appliance
The nonfryer plus can prepare a large range of ingredients. The recipe booklet included helps
you get to know the appliance. You can find more recipes at www.philips.com/kitchen.
Hot air frying
1
Put the mains plug in a wall socket (Fig. 3) and press the power on/off button (Fig. 4).
2
Carefully pull the pan out of the nonfryer plus (Fig. 5).
3
Put the ingredients in the basket (Fig. 6).
Note: Never fill the basket beyond the MAX indication or exceed the amount indicated in the table (see
section 'Settings' in this chapter), as this could affect the quality of the end result.
4
Slide the pan back into the nonfryer plus (Fig. 7).
Never use the pan without the basket in it.
Caution: Do not touch the pan during and some time after use, as it gets very hot. Only hold
the pan by the handle.
5
Choose the temperature control to set the required temperature. See section 'Settings' in
this chapter to determine the right temperature (Fig. 8, 9).
6
Choose the timer control to set the required time. See section 'Settings' in this chapter (Fig.
10, 11).
7
To switch on the appliance, press the start button (Fig. 12).
Add 3 minutes to the preparation time when the appliance is cold.
Note: If you want, you can also let the appliance preheat without any ingredients inside. In that case,
after turn on the power, please set the temperature with control button (Fig. 2). After 3 minutes, the
preheat is completed. Then fill the basket and set the timer to the required preparation time.
The timer starts counting down the set preparation time.
,
During the hot air frying process, the heating-up light comes on and goes out from time to
,
time. This indicates that the heating element is switched on and off to maintain the set
temperature.
Excess oil from the ingredients is collected on the bottom of the pan.
,
8
Some ingredients require shaking halfway through the preparation time (see section 'Settings'
in this chapter). To shake the ingredients, pull the pan out of the appliance by the handle and
shake it. Then slide the pan back into the nonfryer plus (Fig. 13).
D_HD9530-22_EN_CS6_A5.indd 25
14/05/28 19:00
Advertisement
