Operating Your New Appliance; How To Make Risotto (P10) - Sage theMulti Cooker BRC600UK Instruction Booklet

PAge heAder.....

oPeRatIng yoUR neW aPPlIanCe

BefoRe fIRSt USe
Before first use, remove all packaging
material and promotional labels and wash
the non-stick removable cooking bowl,
stainless steel steaming tray and glass lid in
hot soapy water, rinse and dry thoroughly.
HoW to maKe RISotto
SaUtÉ|SeaR setting
Ensure exterior of the removable
1.
cooking bowl is clean before placing
it in the housing (this will ensure
proper contact with the inner
cooking surface).
Plug power cord into a 230V power
2.
outlet. The START|CANCEL button
and RISOTTO button surround will
illuminate in white.
Press the SAUTÉ|SEAR button, the
3.
button surround will illuminate in
white. Press the START|CANCEL
button to activate the setting, the
button surround will illuminate red.
Cover with lid and allow to pre-heat
4.
for approximately 2–3 minutes (do
not pre-heat for longer than
5 minutes).
Add oil/butter and allow to heat/
5.
melt for approximately 1 minute.
If using chicken or seafood in
6.
the recipe, sear in small batches,
cover with lid and stir occasionally
until food is cooked. Remove from
cooking bowl.
Add extra oil/butter to cooking bowl
7.
if necessary or if recipe states. Allow
to heat for approximately 1 minute.
Add ingredients such as onions
8.
and garlic. Sauté, cover with lid if
necessary and stir occasionally for
about 4 to 5 minutes or until cooked
to desired brownness.
10
Stir in Arborio or carnaroli rice and
9.
mix well. Sauté for approximately
2–3 minutes, stirring occasionally.
Pour in wine (if using) and cook
10.
uncovered until rice has absorbed all
liquid and alcohol has evaporated,
stirring frequently.
Press the START|CANCEL button to
11.
stop the SAUTÉ|SEAR setting.
Refer to step 1 in the RISOTTO
12.
setting section below.
RISotto Setting
Follow steps 1–11 in the
13.
SAUTÉ|SEAR setting section above.
Add stock or water and stir well.
14.
Cover with lid and press the
RISOTTO button, then press the
START|CANCEL button to activate
the setting. The START|CANCEL
button surround will illuminate red
and cooking will commence.
Allow to cook until the ready beeps
15.
sound and the Multi Cooker™
automatically switches to the
KEEP WARM setting. This will
take approximately 20–30 minutes
depending on the recipe.
Remove lid and stir well using the
16.
serving spoon provided. At this
stage remaining ingredients can be
added i.e., butter, parmesan cheese,
herbs, salt and pepper.
The Multi Cooker™ will remain
17.
on the KEEP WARM setting for
30 minutes before switching OFF.
However, risotto is best served as
soon as possible after completion
of cooking.