Table of Contents
Advertisement
Names and Functions
Display window
1
1. Remote control infrared receiver (R)
Receives the infrared signals from the remote control.
2. Digital output indicator (DIGITAL OUT)
Lights up when digital audio output is ON. This indicator
does not light up when playing back the HD layer of Super
Audio CD because the digital audio signal cannot be output.
3. Phase invert indicator (PHASE INVERT)
Lights up when the analog output phase is inverted, which
is caused by pressing the phase invert changeover switch.
[Off]
1. GROUND
2. COLD (–)
3. HOT (+)
[On]
1. GROUND
2. HOT (+)
3. COLD (–)
13
2
3
4
7
8
5
9
10
4. Super Audio CD/CD indicator
(SACD/CD)
SACD indicator lights up when playing back the HD (or
SACD) layer of Hybrid Super Audio CD
CD indicator lights up when playing back the CD layer of
Hybrid Super Audio CD.
5. Track number (TRK)
"TRK" is indicated on the upper side, and the track num-
ber is indicated on the lower side when these display area
shows the track number.
6
11
Advertisement
Table of Contents
