Advertisement
Quick Links
Windows/Mac-ready USB Driver
Installation Manual
Recommended PC conditions for Windows and Mac
CPU: Intel Core 2 Duo or higher
Memory: 2 GB or more
Compatible models: DA-06, DA-250, DA-150, DA-200, DA-100, D-08u, D-06u, D-05u, D-N150, D-03X
Caution
When using a Windows operating system, you must ensure that you have downloaded and installed the driver soft-
ware before using a USB cable to connect the PC to the D/A converter.
When using a Mac operating system, the driver software is required when using Bulk Pet transmission mode when
connecting a Mac to either the D-N150 or D-03X.
■ License agreement conditions
• The provided software is copyrighted by LUXMAN CORPORATION (hereafter referred to as LUXMAN) and LUXMAN is
the original rights holder.
• The provided software can only be used for the purpose of controlling a LUXMAN product, and that product must use
the corresponding provided software.
• When the provided software is used, the restrictions, precautions and recommendations apply for each provided soft-
ware type. This is clearly stated and should be observed.
• Modification, adaption and analysis for reverse engineering, decompilation, disassembling, etc. of all or any part of the
provided software is strictly prohibited.
• Distribution via communication lines, transfer, sale, lending and license of the provided software to any and all third par-
ties after duplication of the software on any disks, magnetic tape, USB memory, etc. is strictly prohibited.
• LUXMAN, LUXMAN sales companies, distributors, contracted dealers and the original rights holder of the provided soft-
ware assume no responsibility for any damage, loss or the like that is caused by combining the provided software with
any devices or programs other than those specified in the restrictions, precautions and similarly clearly stated terms in
this service manual or caused by altering the provided software.
• LUXMAN, LUXMAN sales companies, distributors, contracted dealers and the original rights holder of the provided soft-
ware assume no assurance responsibility or liability for the provided software.
· Mac, Mac OS, OS X and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
· Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
· DSD is a trademark.
· Bulk Pet is a registered trademark of INTERFACE Co., LTD.
· The described company names and product names are the trademarks or registered trademarks of each company.
For LUXMAN D/A Converter
OS: Windows 8.1, Windows 10
Mac OS X v10.10 (Yosemite)
OS X v10.11 (El Capitan)
macOS v10.12 (Sierra)
macOS v10.13 (High Sierra)
macOS v10.14 (Mojave)
macOS v10.15 (Catalina)
(As of March 2020)
AG00021F03I
Advertisement
Related Manuals for Luxman DA-06
Summary of Contents for Luxman DA-06
- Page 1 • The provided software is copyrighted by LUXMAN CORPORATION (hereafter referred to as LUXMAN) and LUXMAN is the original rights holder. • The provided software can only be used for the purpose of controlling a LUXMAN product, and that product must use the corresponding provided software.
-
Page 2: Driver Installation
"LUXMAN_Audio Driver" folder to open it. click the "Next" button. When installing driver software downloaded from LUXMAN's website, double-click the downloaded compressed file (ZIP format) to open it. Execute this task for the DA-250, DA-150, D-N150 and D-03X, since the CD software installer is not sup- plied with these products. - Page 3 "Playback" menu of the "Sound" section of the "Control Panel" in Windows Example: If the connected product is DA-06, select "LUXMAN DA-06" as the playback device.
-
Page 4: Windows Setting
"Control Panel" and click the "Set Default" button. Under "Advanced", the sample rate (sampling frequency) and bit depth (quantization bit count) can be selected in Example: If the connected product is DA-06, select shared mode and adjusted for playback using Windows "LUXMAN DA-06" as the playback device. -
Page 5: Transmission Mode Setting
Transmission Mode Setting <for Windows> With the D-N150 and D-03X, the transmission mode can be switched between Isochronous and Bulk Pet. Set the transmission mode and pattern in the "LUXMAN Audio Driver Control Panel", accessible from the Windows "Control Panel". - Page 6 5. Click the "Install" button. transmission mode with the D-N150 and D-03X models connected to a computer using Mac OS. 1. When using a driver downloaded from LUXMAN's website, unzip the downloaded file. After quitting all other running applications, click the "Continue Installation"...