Fluke 73 Specifications

Fluke 73, 77, 175, 177 and
12
Features – 70 and 170 Series DMMs
Feature
Max voltage
True-rms
Temperature
Basic dc accuracy
Backlight
Min/Max/Avg
ToolPak meter hanging kit with magnet
Specifications – 170 Series
Function
VDC
VAC 1
ADC
AAC 2
Resistance
Capacitance
Frequency 3
Temperature
(Model 179)
1 All ac voltage and ac current ranges are specified from 5 % of range to 100 % of range.
2 10 A continuous, 20 A for up to 30 seconds.
3 Voltage frequency is specified from 2 Hz to 100 kHz. Current Frequency is specified from 2 Hz to 30 kHz.
Battery life: 200 hours typical for alkaline. Size (HxWxL): 4.3 cm x 9.0 cm x 18.5 cm (1.7 in x 3.5 in x 7.3 in)
Limited lifetime warranty
Recommended accessories – 70 and 170 Series DMMs
TL71
See page 39
For more information, go to www.MyFlukeStore.com
179 Digital Multimeters
Versatile meters for maintenance,
field service and bench repair.
The 170 Series have the features needed to find most
electrical, electronic, electro-mechanical and heating
and ventilation problems. They are simple to use and
have significant improvements over Fluke's original
70 Series like true-rms, more measurement functions,
conformance to the latest safety standards, and a much
larger display that's easier to view.
170 Series features include:
•
Wide 1000 V measurement range
•
True-rms for precise measurement of non linear
signals
•
Capacitance, resistance, continuity and frequency
•
Built-in thermometer (179)
•
Large, easy-to-read display
•
Backlight for work in dim areas (177, 179)
•
Min/Max to record signal fluctuations
•
Free your hands with the optional TPAK magnetic
hanger
Electrical safety
All inputs are protected to measurement Category III
1000 V and Category IV 600 V. They can withstand
transient impulses in excess of 8000 V assuring your
protection from surges and spikes.
1000 V CAT III
600 V CAT IV
73
600
0.3 %
Range and resolution
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V
60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2
60.00 mA, 400.0 mA, 6.000 A, 10.00 A 2
600.0 Ω, 6.000 kΩ, 60.00 kΩ, 600.0 kΩ, 6.000 MΩ, 50.00 MΩ
1000 nF, 10.00 µF, 100.0 µF, 9999 µF
99.99 Hz, 999.9 Hz, 9.999 Hz, 99.99 kHz
-40 ºC to +400 ºC (-40 ºF to +752 ºF)
TL220 C25
See page 39 See page 44
77 175 177 179 179/TPK
1000 1000 1000 1000 1000
0.3 % 0.15 % 0.09 % 0.09 % 0.09 %
Opt Opt Opt Included
Best accuracy
± 0.09 % (Models 177 and 179)
± 0.15 % (Model 175)
± 1.0 % of reading
± 1.0 % of reading
± 1.5 % of reading
± 0.9 % of reading
± 1.2 % of reading
± 0.1 % of reading
1.0 % of reading
80T-IR 80I-400
See page 42 See page 40
Why you need a
true-rms meter
•
Electronic loads with switching
power supplies or inverters distort
the ac voltage and current sine
wave
•
Non true-rms meters can measure
up to 40 % low
•
True-rms meters make the most
accurate measurements when the
sine wave is distorted
Non
True-rms
Waveform meter
Normal
sine
wave Correct
Square Reads
wave 10 % high
RMS
AVG
Reads
Inverter input current 40 % low
Three
phase Reads
rectified 5-30 % low
For Combo
Kits, see page 5:
•
Electrician's 179 Multimeter
and Voltage Tester Combo Kit
•
Electronics 179 Multimeter and
Deluxe Accessory Combo Kit
•
179 and IR Thermometer Combo Kit
Fluke 73 and 77
Basic autoranging
multimeters with
TouchHold to freeze
®
the measurement
display. Includes
holster and test leads.
Fluke 73
Included accessories
Every Fluke 170 Series meter
comes packaged with TL75 test
leads, 9 V battery (installed), and
manual. The Fluke 179 comes with
an 80BK Temperature Probe.
Ordering information
Fluke-175 Digital Multimeter
Fluke-177 Digital Multimeter
Fluke-179 Digital Multimeter
Fluke-73-3 Digital Multimeter
Fluke-77-3 Digital Multimeter
Fluke-179/61 Combo Kit
Fluke-179/1AC Electricians
Combo Kit
Fluke-179/EDA Combo Kit
Fluke-179/TPK Combo Kit
True-rms
meter
Correct
Correct
Correct
Correct