Battery Saver ("Sleep Mode"); Terminals; Rotary Switch Positions - Fluke 175 User Manual

Models 175, 177 & 179
Users Manual

Battery Saver ("Sleep Mode")

The Meter enters the "Sleep mode" and blanks the display if the
Meter is on but is not used for 20 minutes. To disable the Sleep
mode, hold down the YELLOW button while turning the Meter on.
The Sleep mode is always disabled in the MIN MAX AVG mode
and the AutoHOLD mode.

Terminals

1
2
Item
Input terminal for AC and DC milliamp measurements
1
to 400 mA (600 mA for 18 hrs) and frequency
measurements.
Input terminal for AC and DC current measurements to
2
10 A (20 A for up to 30 seconds) and frequency
measurements.
Input terminal for voltage, continuity, resistance, diode,
3
capacitance, frequency, and temperature (Model 179
only) measurements.
Common (return) terminal for all measurements.
4
2
3
V
FUSED
4
AIK01F.EPS
Description

Rotary Switch Positions

Switch
Position Measurement Function
K
AC voltage from 0.1 mV to 1000 V.
Hz Frequency from 2 Hz to 99.99 kHz.
L
DC voltage 1 mV to 1000 V.
Hz
Frequency from 2 Hz to 99.99 kHz.
m L
DC mV 0.1 mV to 600 mV dc.
Temperature − 40 °C to + 400 °C
T
Ohms from 0.1 Ω to 50 MΩ.
e
Farads from 1 nF to 9999 µF.
E
2-kHz beeper turns on at <25 Ω and turns off at
R
>250 Ω.
G
Diode test. Displays OL above
F
AC or DC mA from 0.01 mA to 600 mA.
B
mA
Hz
Frequency of AC mA 2 Hz to 99.99 kHz.
F
AC or DC A from 0.01 A to 10 A (20 A for 30
B
seconds).
A
>10.00 display flashes.
>20 A, OL is displayed.
Hz
Frequency of AC A to 99.99 kHz.
Note: AC voltage and current AC-coupled, true RMS, up to 1 kHz.
− 40 °F to + 752 °F
~
2.4 V.