Minuteman E Ride ER28C User Manual page 29

Machine Overview
Brush Changes On the Cylindrical Deck
In order to change the brushes on the cylindri-
cal deck the side squeegee must be moved in
order to access the brush doors. The cylindri-
cal deck was designed so one can change the
brushes without having to realign the side
squeegees. This is accomplished by removing
the yellow three-sided knob (Item C) and
swinging the squeegee along the hinge brack-
et (Item D) located at the front of the deck,
gaining access to the brushes. Once complet-
ed inserting new brushes, replace the brush
doors and swing the squeegee back into place,
tightening down the knob (Item C).
In order to remove or adjust the alignment of
the side squeegees on the cylindrical deck, re-
move the black three-sided knobs (Item B) and
follow the instructions on the previous page.
29