Dimplex Handyman Installation Instructions page 4

Dimp-13460-HandyInstruction-rob 4/22/04
INSTALLATION / OPERATION
SECTION 8
Maintenance
The sprayhead should be cleaned periodically
to remove limescale and any other particles
trapped in the swivel arm. This may be done
by unscrewing the sprayhead and scrubbing
with a stiff-bristled brush.
If necessary immerse the sprayhead in a
proprietary limescale remover for several hours
and scrub away loose deposits. Rinse the
sprayhead thoroughly before attaching to the
swivel arm.
Service Policy
Should you need to contact the Dimplex
Customer Service Centre regarding any
fault with this product please have the Model
Number; Serial Number and Date
of Purchase of the Product readily available.
5:18 PM Page 7
Glen Dimplex UK Limited guarantee this
product for a period of one year, from
date of purchase, against mechanical
defects arising from faulty materials
WARMER
or from poor manufacturing
workmanship, providing the product
has been installed by a competent
person in accordance with the fitting
instructions.
Glen Dimplex UK Limited undertake
to repair or replace, at their discretion,
COOLER
without charge, provided the product
has been properly maintained and
Handyman
operated in accordance with the
operating instructions. Any component
found to be defective during this
period, as the result of misuse or
damage, or the effects of scaling, will
not be covered by this guarantee.
This product must not be modified,
repaired or taken apart except by a
person authorised by Glen Dimplex UK
Limited.
This guarantee is only valid within the
United Kingdom.
This guarantee does not affect your
statutory rights.
WARMER
GUARANTEE