Acer Altos R360 F2 Frequently Asked Questions Manual page 61

Altos R360 F2 FAQ (Frequently Asked Questions)
r. Now you can reboot the system and install the Operating System. Select Exit
Ctrl+Alt+Del Ctrl+Alt+Del to reboot the system. Ctrl+Alt+Del Ctrl+Alt+Del
14. I saw below logs in the RAID utility of MegaRAID.
Controller ID: 0
ANSWER: The warning message means BBU (i.e. battery) is disabled and Write Policy is changed from Write ANSWER:
ANSWER: ANSWER:
Back to Write Through. That could be due to BBU charging status is not completed, or BBU failure.
15. How do I check the settings of coercion with MegaRAID?
ANSWER: Please enter RAID BIOS utility (press CTRL-H during POST) and select Adapter Properties -> Coercion ANSWER:
ANSWER: ANSWER:
Mode.
16. Does MegaRAID support HDD location function?
ANSWER: Yes. You can identify the physical HDD or the virtual drive through the HDD location function of ANSWER: ANSWER: ANSWER:
RAID BIOS utility during POST or RAID utility in Windows/Linux.
When you execute the function, the status of HDD activity indicator will be amber blinking.
NOTE. The LEDs on drives that are global or dedicated hotspares do not blink.
17. How do I identify the HDD with the HDD location function?
ANSWER: You can identify the physical HDD or the virtual drive through the RAID BIOS utility during POST or ANSWER:
ANSWER: ANSWER:
RAID utility in Windows/Linux.
RAID BIOS utility:
•
a. Please press CTRL-H to start the RAID BIOS utility during POST
b. In the Home page, click on the physical or logic HDD that you want to locate. Then, select the "Locate"
option and click Go
RAID utility in Windows/Linux:
•
a. Launch the RAID utility
b. Click the physical HDD desired in Physical tab
c. Right click the on the HDD. Then, select "Start Locating Drive"
To stop the LEDs from blinking, select "Stop Locating Drive"
18. What is the default setting of disk write cache of MegaRAID?
ANSWER: R: R: R: The default setting of disk cache of virtual drive is Unchanged. ANSWE
ANSWE ANSWE
BBU disabled; changing WB logical drives to WT
61
Exit, click on Yes Exit Exit Yes and press Yes Yes