Acer Altos R360 F2 Frequently Asked Questions Manual page 13

Altos R360 F2 FAQ (Frequently Asked Questions)
11. Should I update the BMC, FRU and SDR when I add/remove CPU or memory on Altos R360 F2?
ANSWER: ANSWER: Yes, you need to re-update the SDR when add/remove CPU and PSU. ANSWER: ANSWER:
12. Should I change any jumper before I update the firmware of BMC or FRUSDR?
ANSWER: No. ANSWER:
ANSWER: ANSWER:
13. What's the default username & password of BMC of Altos R360 F2?
ANSWER: ANSWER: ANSWER: ANSWER:
Username: root
Password: superuser
14. How do I enable the failover function for BMC connection?
ANSWER: Please enter connect to Smart Console and select Configuration ANSWER: ANSWER: ANSWER:
You will see the Enable LAN Failover available.
15. How do I enable/disable SOL (Serial Over LAN) function of BMC?
ANSWER: ANSWER: Please enter BIOS Setup during POST. ANSWER: ANSWER:
a. Select Server Management
b. Select Console Redirection and Change the setting form Disabled to Serial Port A.
c. Please make sure the Console Redirection option is enabled with default setting.
Flow Control
Baud Rate
Terminal Type
Legacy OS Redirection
Terminal resolution
Legacy OS Redirection Resolution [80x25]
16. What is IPMITOOL?
ANSWER: ANSWER: The ipmitool program provides a simple command-line interface to BMC. It features the ability to ANSWER: ANSWER:
read the SDR (sensor data repository) and print sensor values, display the contents of the SEL (System Event
Log), print FRU (Field Replaceable Unit) inventory information, and perform remote power control.
Configuration -> IPv4Network Configuration Configuration
[None]
[115.2k]
[VT100]
[Disabled]
[80x24]
13
IPv4Network or IPv6 Netw IPv4Network IPv4Network IPv6 Netwo o o o rk rk rk rk. IPv6 Netw IPv6 Netw