Altos R360 F2 FAQ (Frequently Asked Questions)
6.
Do I need special license to enable Smart Console?
ANSWER:
ANSWER: No.
ANSWER:
ANSWER:
7.
Does Altos R360 F2 Smart Console support dedicated NIC?
ANSWER: Yes. RMM4 Dedicated Server Management Port is required to support dedicated NIC.
ANSWER:
ANSWER:
ANSWER:
Altos R360 F2 Smart Console can be either dedicated NIC or share-NIC which shares the same network
connection with onboard Gigabit.
8.
Which network port of Altos R360 F2 is connected to Smart Console?
ANSWER: Altos R360 F2 support two types of network connection interface and two types of network
ANSWER:
ANSWER:
ANSWER:
connection mode for BMC connection.
For connection interface
Shared (Default)
Shared (Default): : : : BMC is connected to onboard Gigabit LAN 1 and LAN 2 port.
Shared (Default)
Shared (Default)
•
Dedicated (Optional): : : : BMC is connected to optional dedicated server management port. (RMM4
Dedicated (Optional)
Dedicated (Optional)
Dedicated (Optional)
•
Dedicated Server Management PORT is required to support Dedicated NIC)
For connection mode:
Concurrent (Default): : : : All of onboard LAN port 1, onboard LAN port 2 and optional dedicated server
Concurrent (Default)
Concurrent (Default)
Concurrent (Default)
•
management port can be used for Smart Console with different IP address. All NIC ports must be on
different subnet.
Failover: : : : All of onboard LAN port 1, onboard LAN port 2 and optional dedicated server management port
Failover
Failover
Failover
•
are bonded together. The setting of onboard LAN port 1 will be used for bonding. If a connection fails,
Smart Console connection will switch to the others. Failover mode can be enabled in Smart Console.
9.
Is there any cable that I should connect with Smart Console?
ANSWER: No, the Smart Console is integrated in main-board.
ANSWER:
ANSWER:
ANSWER:
10.
Does Smart Console support BBU (Battery Backup Unit) or external power adapter?
84