Amana SS 5 Use And Care Manual page 16

STEP NINE
a. Attach loose wire to bottom of cast burner, and then
to any of the open tabs in the igniter. Insert the
four remaining igniter wires coming through the
grommeted hole on side of the grill into the
remaining tabs in the igniter.
Note: The igniter is designed in such a way
that it does not matter which terminal tab is
used when connecting igniter wires.
b. Place the electronic igniter into the igniter hole on
the front of the side burner shelf. Make certain that
the igniter wire tabs are facing away from the grill.
c. Secure the igniter in place using the plastic lock nut.
Make sure to tighten securely.
d. Install AA battery, negative side first.
e. Install spring and cap assembly and tighten
securely.
SS 5 Assembly
9a
9c
9d
9b
Close-up of igniter wires attaching to igniter.
Close-up of igniter wire attaching to burner.
9e
16