11. HEIGHT OF PRESSER BAR
STANDARD
The clearance between presser foot and needle plate should be 6.0 ~ 6.5 mm.
ADJUSTMENT
1. Raise presser foot.
2. Loosen the screw on presser bar guide bracket.
3. Adjust height of presser bar.
(Presser foot should be parallel to feed dog.)
4. Tighten the screw.
(B338 ⋅ B346 ⋅ B347 ⋅ B348)
(B341 ⋅ B349 ⋅ B351 ⋅ B352)
- 33 -