G Changing Components; Adding Accessories - Cannondale Synapse Carbon Owner's Manual

PaRt i
We recommend against this type of riding because
of the increased risks; but if you choose to take the
risk, at least:
• Take lessons from a competent instructor first
• Start with easy learning exercises and slowly
develop your skills before trying more difficult or
dangerous riding
• Use only designated areas for stunts, jumping,
racing or fast downhill riding
• Wear a full face helmet, safety pads and other
safety gear
• Understand and recognize that the stresses
imposed on your bike by this kind of activity may
break or damage parts of the bicycle and void the
warranty
• Take your bicycle to your dealer if anything breaks
or bends. Do not ride your bicycle when any part
is damaged.
If you ride downhill at speed, do stunt riding or
ride in competition, know the limits of your skill
and experience. Ultimately, avoiding injury is your
responsibility.
2.G - ChanGinG ComPonents
oR addinG aCCessoRies
There are many components and accessories
available to enhance the comfort, performance and
appearance of your bicycle. However, if you change
components or add accessories, you do so at your
own risk. The bicycle's manufacturer may not have
tested that component or accessory for compatibility,
reliability or safety on your bicycle.
Before installing any component or accessory,
including a different size tire, make sure that it is
compatible with your bicycle by checking with
your dealer. Be sure to read, understand and follow
the instructions that accompany the products you
purchase for your bicycle. see also PaRt ii, seCtion
d. insPeCt foR safety.
WaRninG
failURe to
PRoPeRly install, oPeRate and maintain
any ComPonent oR aCCessoRy Can
ResUlt in seRioUs inJURy oR death.
WaRninG
Changing the components on your bike may
void the warranty. Refer to your warranty, and
check with your dealer before changing the
components on your bike.
14
ConfiRm ComPatiBility,