Eon Settings Menu - Medion MD 81460 Instruction Manual

Table of Contents

Advertisement

Operation
TA (Traffic Announcement) TRAFFIC RADIO
The radio will be changed to automatically in CD operation if traffic radio is trans
mitted, if the TA function has been switched on (TA will appear in the display).
Stations transmitting traffic announcements will be indicated by TP in the dis
play. Switching over to the EON connection station will take place occasionally
(see below) if EON has found traffic radio on a different channel. The volume le
vel will be raised at the same time, provided that is lying under the threshold.
Only stations that transmit a traffic radio signal can be stored or found during an
automatic station search process or with the TUN / TRK / SKIP+ / buttons (22),
if the TA function has been switched on.
You will be able to interrupt the process, if the radio has switched from the CD /
MP3 Mode to or from a station without traffic announcements to a station with
traffic announcements. Press the TA button (11) to do this. The TA function will
now be interrupted, without switching the TA Mode off
EON TA („Enhanced Other Network Information")
Additional functions will be available to you, if a traffic radio station with the ex
tended 'EON' station information has been found. In particular, the device will
then switch to a station with traffic radio, if you are listening to a station that does
not transmit any traffic radio. The previous station position will be switched back
to after the traffic message.
EON-TA LOCAL and EON-TA DISTANCE
• Press down the TA button (11) for a longer time, to select the EON TA LOCAL /
EON TA DISTANCE Mode.
EONTA-LO – Local Mode: Traffic stations from the local area will be searched for
in this mode. EON TA LO will flash in the display
EONTA-DX – Remote Mode: Traffic stations from a more remote area will also be
searched for in this mode. EON TA DX will flash in the display.

EON settings menu

• Press down the SEL button (13) in the Radio Mode. You will reach the EON set
tings menu.
• Press the SEL button (13) again for a short time, to call up the sub menus. You
will change the setting of a sub menu with the MULTIJOG induction regulator
(5). The settings do not need to be confirmed and will be stored as soon as
the display has switched back to the radio or CD display.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents