Medion MD 81460 Instruction Manual page 17

TA SEEK or TA ALARM
TA SEEK: The search process will be started and will search for the strongest
TA station (station with traffic announcements), if you have left a reception
area or the signal for traffic announcements has become weaker.
TA ALARM: An alarm sound will be emitted, if you have left a reception area
or the signal for traffic announcements has become weaker.
PI SOUND or PI MUTE
PI SOUND: Station search process with sound.
PI MUTE: The sound will be switched to mute during the station search pro
cess.
RETUNE L or RETUNE S
RETUNE L („long"): The search process for a station with the correct PI coding
(channel identification) will last for 90 seconds.
RETUNE S („short"): The search process for a station with the correct PI co
ding (channel identification) will last for 30 seconds.
MASK DPI or MASK ALL
MASK DPI: Conceals the AF transmitters that have a different PI coding.
MASK ALL: Conceals the AF transmitters that have a different PI coding and
all disruptive non PI stations that have the same transmitting frequency.
BEEP 2ND, BEEP ALL or BEEP OFF
BEEP 2ND: A beeping sound will be emitted at a long button press.
BEEP ALL: A beeping sound will be emitted at each button press
BEEP OFF: Beeping sound off.
SEEK1 or SEEK2
SEEK1: Station search stops when the nearest station is being received.
SEEK2: Station search stops if either of the TUN / TRK / SKIP+ / buttons (22)
has been released and the nearest station is being received.
DSP OFF,FLAT,POP M,CLASSICS or ROCK
DSP OFF: Audio output without digital effects (Digital Sound Processing)
FLAT,POP M,CLASSICS or ROCK: different digital effects for the audio out
put.
Please pay attention to the fact that the BAS (bass) and TRE (treble) set
tings will not be available by pressing the SEL button (13), if the digital ef
fect has been switched on.
MD 81460
Operation
EN
17