Installing the Burner and Components and Grates
WARNING
•
Never attempt to operate the cooktop with any of the
burner parts removed.
•
Do not attempt to adjust the burner air mixture
settings. All adjustments are preset at the factory.
1.
Remove the brass burner rings, porcelain burner caps
and porcelain grates from their shipping packages.
2.
Place each burner ring onto its corresponding burner
base, be sure to align the five alignment tabs on the
bottom of each ring with the notches in the burner
base.
Burner Ring Installation
I
nstallatIon
Burner Ring
Burner Base
I
nstructIons
3.
Set each porcelain burner cap on top of its
corresponding burner ring.
4.
Put each grate onto the cooktop. Be sure that the
rubber feet are positioned in the locating dimples.
SGM Burner Components
Continued...
Grate
Burner Cap
Burner Ring
Top Frame
Burner Head (Fixed)
7