Filling With Water - Honeywell CS10XE Owner's Manual

USE & OPERATION

FILLING WITH WATER

Open the Water Fill Tray located at the back of the unit. The
water tank of the unit holds up to 10 Litres of water.
The Water Level display window is located on the side of the
unit. Refill the water tank when water level is low. Do not fill
water above the Max water level mark. Check water level in the
tank before running the COOL function. Please be sure water
in the tank is always above the minimum water level mark.
Water Fill Tray
Running the unit with inadequate water may cause pump failure.
If ice is available you may add ice in the top compartment
Water Level Indicator
to enhance the cooling performance.
CAUTION
Unplug from power when refilling.
13