Honeywell CS10XE Owner's Manual page 19

PROBLEM
The unit does not respond
TROUBLESHOOTING GUIDE
POSSIBLE CAUSE
Remote control batteries.
Damaged Control Panel
on unit.
SOLUTION
Check batteries. Replace if
needed. Try to operate using
the control panel.
Try to activate the unit with the
Remote Control. If the unit
responds, then the Control
Panel on the unit may be
experiencing problems -
contact the Customer Service
Center.
If neither the Remote Control
or the Control Panel is
working, contact the Customer
Service Center.
Customer Support: serwis@duraterm.pl
Tel. + 48 23 662 4904
17