Remote Control - Honeywell CS10XE Owner's Manual

USE & OPERATION

REMOTE CONTROL

Power: On / Off
Speed: Low / Medium / High / Sleep
Cool: Pump ON / OFF
Swing: Controls the motion of the louvers
Timer: Controls timer function for automatic shut off
Ion: Turn ON / OFF the Ionizer function
NOTE
• The remote control for your air cooler already has its battery installed.
• The remote control requires a CR2032(1 x 3V) coin type or equivalent battery for
replacement.
• Open the battery compartment at the back of the remote control and insert ta CR2032(1 x 3V)
coin type or equivalent battery. Care must be taken to insert the batteries according to the correct
polarity (+ / –) markings shown inside the battery compartment.
• Always point the remote control signal transmitter towards the unit when operating.
• Make sure that the signal path is not obstructed.
• Remove the batteries if the unit is not going to be used for an extended period of time.
• Do not drop the remote control.
• Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
• Do not mix old and new batteries.
• Exhausted batteries are to be removed from the product.
12