Casio KL-G2TC User Manual page 46

4.
Press ㄏㄠ .
ˇ
5.
Press .
This displays 好 .
You can select a different character by pressing 選字 . After selecting
the character you want, press 執行 .
Inputting Chinese Using the Cangjie Input Method
With the Cangjie input method, combinations of radicals input by you are
converted to Chinese characters.
Keys Use for Cangjie Input
Example: 你好
1.
Press 注 / 倉 / 北 and then move the input mode pointer (
2.
Press 人弓火
3.
Press 變換 / 空白 .
This displays 你 .
If there is more than one candidate displayed at the bottom of the
screen, select the one you want and then press 執行 .
4.
Press 女弓木 .
5.
Press 變換 / 空白 .
This displays 好 .
If there is more than one candidate displayed at the bottom of the
screen, select the one you want and then press 執行 .
44 EN
Inputting Chinese Using the Pinyin Input Method
The Pinyin input method uses the pinyin method of Romanization and tones
(rising or falling) to input Chinese. Each syllable can have one of four tones
or a light voice, which is specifi ed following the alpha character input of the
symbol.
Tone/Light
Voice
Number key
Keys Used for Pinyin Input
Example: 你好 (ni3hao3)
1.
Press 注 / 倉 / 北 and then move the input mode pointer (
or ) to 倉 .
2.
Press N I.
3.
Press 3.
This displays 你 .
You can select a different character by pressing 選字 . After selecting
the character you want, press 執行 .
4.
Press H A O.
5.
Press 3.
This displays 好 .
You can select a different character by pressing 選字 . After selecting
the character you want, press 執行 .
1 2 3 4 5
or ) to 北 .