Casio KL-G2TC User Manual page 34

8.
Specify the length of the block and then press 執行 .
Direct input of values is also supported.
The length of each block and the number of input characters affects
how the label is printed. You can check the status of the printout by
looking at whether the displayed block length is enclosed in brackets as
described below.
[6.0cm]: Print will be the specifi ed length.
(6.0cm]: Print will be the specifi ed length, but text will be compressed
horizontally.
6.0cm]: Print will be longer than that specifi ed length. (Text will be
compressed 50% in the text direction.)
You can also check the printout with the Imager in the upper side of the
display.
32 EN
Specifying the Overall Label Length (Fixed Tape
Length)
1.
Input text.
2.
Press 功能 and then 格式 .
If there is only one block in the label, advance to step 4.
3.
Select 全文格式 (All Form) and then press 執行 .
4.
Use the and arrow keys to display the 帶長 (Tape Length) setting
screen.
5.
Select 固定 (Fix) and then press the
arrow key.
This highlights the value.
6.
Specify the length of the label and then press 執行 .
Direct input of values is also supported.
The message 長度錯誤 (Length Error) will appear on the display if the
text you input is incompatible with the length setting. You can check the
status of the printout by looking at whether the displayed tape length is
enclosed in brackets as described below.
[10.5cm]: Print will be the specifi ed length.
10.5cm]: Print will be longer than that specifi ed length.