Casio KL-G2TC User Manual page 35

Simple Length Setting for CD or DVD Case
Labels (One-touch Length Setting Keys)
You can use the one-touch length setting keys for quick and easy specifi cation
of the lengths of commonly used labels for CD or DVD cases, fi les, etc. One-
touch setting simplifi es the task of printing multiple labels of the same length.
Important!
Use the 帶長 (Tape Length) or 區段長度 (Block-Length) settings to specify
the label length when using blocks to lay out the label. Using the one-touch
length setting keys to specify the tape length in this case may produce a
label that is longer than the specifi ed value.
A length specifi ed with the one-touch length setting keys will also become
the Fixed Tape Length setting value.
Specifying a tape length with the one-touch length setting keys
automatically confi gures following settings: 區段長度 (Block-Length) : 固定
(Fix), 文字排版 (Text Alignment) : 等距 (Equal), 區段排版 (Block Alignment) :
等距 (Equal). Note that the block length can be fi xed when there is one
block only.
The one-touch length setting keys can be used for a free design label only.
■ Supported Tape Lengths
One-touch length setting keys
15.0cm
10.0cm
5.0cm
You can adjust the label length in 1mm units.
One-touch length setting keys
■ To specify a label length
Example: To specify the length of a CD/DVD case label
1.
Press 10.0cm.
You can make the label longer by pressing
+0.1cm or shorter by pressing -0.1cm.
You can input text either before or after
specifying the label length.
Label Application
Paper fi le, binder, etc.
CD/DVD case, etc.
Name sticker, etc.
Length indicator changes
to 10.0cm.
33 EN