Casio KL-G2TC User Manual page 32

Setting Item
方向 (Direction) Specifi es either 直排 (Vertical) or 橫排 (Horizontal).
Specifi es alignment ( 靠左 (Left), 等距 (Equal), 置
文字排版
中 (Center), 靠右 (Right)) of the text within a block.
(Text Alignment)
page 34
Specifi es the space between characters in the
range of 0 to 31.9mm.
The tape length is also adjusted in accordance
文字間隔
with the character pitch setting.
(Text Pitch) Specifi cation of character spacing is not
supported when 等距 (Equal) is specifi ed for 文
字排版 (Text Alignment) or when 固定 (Fix) is
specifi ed for 區段長度 (Block-Length).
自動 (Auto): Automatically adjusts the block
length in accordance with the number of
區段長度
characters in the block.
(Block-Length)
If you want to specify the block length manually,
select 固定 (Fix) for this setting.
7.
After all of the settings are the way you want, press 執行 .
Specifying the Print Format of All Text
Settings you confi gure with the procedure in this section is applied to all of the
text in a label, even if there are multiple blocks.
1.
Input text.
2.
Press 功能 and then 格式 .
If there is only one block in the label, advance to step 4. In this case,
you can confi gure either block print format or overall print format
settings.
3.
Select 全文格式 (All Form) and then press 執行 .
4.
Confi gure the settings of each item.
Use the and arrow keys to select a setting item and then use
and to change its setting.
30 EN
Description
page 31
Setting Item
Enables/disables mirror image printing. Select 否
(Normal) to print normal (not mirror image) text.
Select mirror image text when printing with an
iron-on transfer cartridge (sold separately) for
transfer to a handkerchief, T-shirt, etc.
鏡射 (Mirror) 鏡射 (Mirror) setting is not required when
printing to iron-on fabric tape (sold separately).
Mirror image text can also be printed with a
transparent tape cartridges (sold separately)
and affi xed to the back of glass or some other
transparent surface.
傾斜 (Slanted)
Enables/disables slanted printing.
是 (On): Adjusts the character pitch in accordance
with differences in the width of each alphanumeric
character.
均衡 (Proportional)
否 (Off): Adjusts the alphanumeric character pitch
in accordance with differences in the width of each
Chinese character.
平滑 (Smoothing)
Enables/disables character line smoothing.
區段間隔
Specifi es the spacing between blocks.
(Block-Space)
Specifi es the size of leading and trailing margins.
You can select one of the margin settings below,
or 不留 (None) (page 20).
小 (Narrow): Approximately 3mm wide leading and
trailing label margins
中 (Medium): Approximately 10mm wide leading
and trailing label margins
大 (Wide): Approximately 19mm wide leading and
邊距 (Margins)
trailing label margins
Important!
Margin cut may not be performed when the tape
is short as defi ned by the following: approximately
28mm or less with 小 (Narrow) margins;
approximately 35mm or less with 中 (Medium)
margins; approximately 44mm or less with 大
(Wide) margins. After printing, use scissors or
some other implement to trim the margins.
Description