Specifying Character Size - Casio KL-G2TC User Manual

Important!
Note that the block alignment specifi cation is valid only when 固定 (Fix) is
selected for the 帶長 (Tape Length) setting.
1.
Input text and divide it into blocks (page 28).
2.
Press 功能 and then 格式 .
If there is only one block in the label, advance to step 4.
3.
Select 全文格式 (All Form) and then press 執行 .
4.
arrow keys to display the 帶長 (Tape Length) setting
Use the and
screen.
5.
Select 固定 (Fix) and then press the
arrow key.
6.
Specify a value that is greater than the original label length value.
Direct input of values is also supported.
7.
arrow key to display the 區段排版 (Block Alignment) setting
Press the
screen.
8.
Select the desired alignment and then press 執行 .

Specifying Character Size

You can use the procedures in this section to manually specify character size.
If you don't specify character size manually, the size is adjusted
automatically (Just Fit Print).
Specifying the Size of Specifi c Characters
You can specify the size of specifi c characters within the range of 1x1 to 5x8.
The maximum character size (vertical) that can be printed depends on the
tape width. For more information, see "Tape Width, Number of Lines, Size
Factor List" (page 60).
The value is highlighted.
Printing results may differ depending on whether text is vertical or
horizontal. For example, when 1×2 is specifi ed, horizontal text is elongated
horizontally while vertical text is elongated vertically.
1.
2.
3.
4.
1×1
Input text.
Press 功能 and then 印字倍數 .
Select 文字單位 (Character Unit) and then press 執行 .
Specify the 高 (Height) and 寬 (Width) factors
and then press 執行 .
Direct input of values is also supported.
5×6
35 EN