Sample Print - Casio KL-G2TC User Manual

Important!
Be sure to use a 12mm wide or wider tape cartridge for bar code label
printing.
You can input comment text above a bar code (up to 60 characters).
You should confi rm that a printed bar code can be read correctly before
actually using it. If a bar code cannot be read correctly, make the
adjustments below.
Lighten the print density (page 54).
Increase the size of the print (step 6, page 39).
Use 特殊 (Special Tape) or 不裁切 (Uncut) as the cut mode (page 22).
The tapes below are suitable for bar code label printing.
Black lettering on white tape (WE)
Blue lettering on white tape (WEB)
Black lettering on yellow tape (YW)
The letters in parentheses indicate the tape model number.

Sample Print

Text
Data
1.
On the main menu (page 15), select 新增 (New) and then press 執行 .
2.
Select 條碼 (Bar Code) and then press 執行 .
3.
Select the type of bar code you want to use
and then press 執行 .
If you select ITF, CODE39, or CODABAR
as the bar code type, specify whether or
not to include a check digit and then press
執行 .
4.
Input comment text (0 to 60 characters) and then press 執行 .
Without inputting any comment text, press 執行 .
5.
Input data and then press 執行 .
6.
Select the size of the bar code label and then press 執行 .
7.
Select 列印 (Print) and then press 執行 .
8.
Specify the number of copies to be printed and then press the
key.
Direct input of values is also supported.
You can specify from 1 to 100 copies.
9.
Specify a cut mode (page 21) and then press 執行 .
arrow
39 EN