Table of Contents
Advertisement
Important!
Numbered label printing continues for the specifi ed number of copies. To avoid
running out of tape during a print operation, check before hand to ensure that
the tape cartridge being used has suffi cient tape remaining.
1.
On the main menu (page 15), select 新增 (New) and then press 執行 .
2.
Select 列印編號 (Numbering) and then press 執行 .
3.
Select a print format and then press 執行 .
Here we will select 4.
Flashes (Indicates area where input is enabled.)
4.
Input COMMENT1 text and then press 執行 .
The start number is
displayed.
5.
Change the start number if you want, and then press 執行 .
To change the start number, delete the current number and then
re-input. You can input up to fi ve digits.
6.
Input COMMENT2 text and then press 執行 .
7.
Select the numbering style and then press 執行 .
8.
Select 列印 (Print) and then press 執行 .
9.
Specify the number of copies to be printed with consecutive numbers,
confi rm that the start（開始）and end（結束）numbers are what you
want, and then press 執行 .
You can input a number of copies value from 1 to 100.
Direct input of values is also supported.
24
EN
Allowable number of input characters
Current number of input characters
10.
Specify a cut mode (page 21) and then press 執行 .
The number following 99999 is 00000.
Important!
Avoid allowing tape cuttings to pile up around the printer tape outlet.
Tape cuttings around the tape outlet create the risk of tape jamming and
malfunction.
Confi guring Print Format Settings
You can confi gure the print format settings below as you input text.
Tape length (3.0 to 30.0 cm)（帶長）
Vertical or horizontal text direction（方向）
Mirror printing enable/disable（鏡射）
While inputting text, press 功能 and then 格式 to display the print format
setting screen. Use the screen to confi gure the settings you want.
Creating an Index Label
Index labels come in handy when managing fi les, etc. You can also use any of
the canned phrases that are built-into printer memory.
Index Label Formats
You can choose from among the four index label formats below, depending on
your fi ling system and desired text orientation.
Format 1
Format 2
The same content is printed on the front and back of the index label.
Important!
Index label creation is supported for 24mm wide tape only. Make sure that a
24mm wide tape cartridge is loaded in the printer.
Format 3
Format 4 (Vertical)
Advertisement
Table of Contents
