Turning The Projector Off; Focusing And Sizing The Projected Image - BOXLIGHT CD-753z User Manual

Warning:
Never look into the lens when the lamp is on. This can damage your eyes. It is
especially important not to let children look into the lens.

Turning the Projector Off

1. To turn the projector off, press the
Power button (on either the Remote
Control or the Projector Control
Panel). The confirmation message
will appear on the screen for about
3 seconds.
2. Press the Power button again while the message is still on the screen. To cancel
the power OFF and resume operation, wait until the message disappears from
the screen.
3. After the fan has turned off automatically you may turn off the Power Switch.
4. Then and only then you may unplug the power cord.

Focusing and Sizing the Projected Image

After the image appears on the screen, check the focus and size to fit properly
on the screen.
Rotate the focus ring until the projected image is clear.
Rotate the zoom ring until the projected image is at the desired size.
Projector
2 3