Advertisement
18-6-1 Recording
While in the record & playback menu select " REC " and PUSH [ENT]. The LCD will return to
its previous display with the legend " REC " in the bottom left corner of the LCD to show that
the RU8200 is active. If the squelch is currently open, recording will take place immediately,
otherwise recording will take place next time the squelch opens.
While recording is in progress, the second line from the bottom of the LCD (usually displaying
the standby frequency in 2VFO mode) changes to a progress bar " REC =====> " indicating that
recording is in progress. Once started, the recording process continues for about 20 seconds and
the legend " End " is displayed when the recording process is complete. Once started, recording
continues even if the squelch closes but you may PUSH the [CLEAR] key half way through a
recording to stop it from recording 20 seconds of nothing! PUSH the [CLEAR] key after
recording has ended to clear the recording related text from the LCD.
Continuous recording
To enable continuous recording of the last 20 seconds, select " REC " while in the record &
playback menu select then PUSH [ENT]. The LCD will return to its previous display with the
legend " REC " in the bottom left corner of the LCD to show that the RU8200 is active. If the
squelch is currently open, recording will take place immediately, otherwise recording will take
place next time the squelch opens. When the 20 second recording process has completed,
recording will simple start again from the beginning forming a loop.
a) To force a new 20 second record period to commence, PUSH [ENT]
b) To stop the current recording to stop at the end of the current 20 second block,
PUSH [CLEAR]
c) To stop recording immediately, PUSH [CLEAR] PUSH [CLEAR]
Note: RU8200 recording is disabled when the band scope facility is operational.
18-6-2 Playback
It is assumed that you have already made a recording. While in the record & playback menu
select " PLAY " and PUSH [ENT]. The LCD will return to its previous display with the legend
" PLY " in the bottom left corner of the LCD to show that the RU8200 is active. Playback will
start instantly.
While playback is in progress, the second line from the bottom of the LCD (usually displaying
the standby frequency in 2VFO mode) changes to a progress bar " PLY =====> " indicating that
playback is in progress. Once started, the playback process continues for about 20 seconds and
the legend " End " is displayed when the playback is complete.
You may PUSH the [CLEAR] key to cancel playback or clear the recording related text from the
LCD.
Neue Seite 1
Seite 6
Advertisement
