Table of Contents
Advertisement
FUNCTION BUTTON
Mode:
FUNCTION:
Time:
Speed:
Distance:
Calorie
Scan:
NOTE
1.
Monitor requires two "AAA" batteries
2.
The monitor will turn on automatically by pressing Mode key when you start pedaling.
3.
The monitor will turn off automatically if no signal is detected for four minutes.
4.
If monitor is illegible or partial segments appear, remove batteries and wait 15
seconds to re-install.
Customer Service 1-888-707-1880
Or email customerservice@dyaco.ca
MONITOR INSTRUCTIONS
Press to select functions between: time, speed, distance, calories and
scan.
Press and hold for 3 seconds to rest all values to zero.
Displays your elapsed workout time up to 99:59
Displays the current speed up to 99.9 miles.
Displays the cumulative distance traveled during your workout up to 99.9
miles.
Displays the cumulative calories burned at any given time during your
workout up to 999 kcal.
Note: This is a rough guide used for comparison of different exercise
sessions, which cannot be used for medical purposes.
Displays each function in sequence every 4 seconds. The display loop is
time, speed, distance and calories.
12
Dyaco Canada Inc.©2015
Hide quick links:
Advertisement
Table of Contents
