Assembly Instructions
UNPACK THE CARTON AND
PLACE ALL PARTS ON THE
FLOOR. CAREFULLY
REMOVE ALL PACKING
MATERIAL AND CHECK EACH
PART WITH THE MANUAL FIRST.
REMEMBER SOME PARTS
ARE PRE-FITTED TO LARGER
COMPONENTS.
IMPORTANT
ASSEMBLE WITH ALL NUTS
AND BOLTS LOOSE AT
FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY
STEPS.
54
57
Step 1
a: Attach the Front Stabilizer (57)
onto the front curve plate of the
Main Frame (34) with 2sets x Cap
Nuts (55), Bolts (54) and Big Curve
Washers (17).
6
11
a.
55
17
b: Attach the Rear Stabilizer (53)
onto the rear curve plate of the
Main Frame (34) with 2sets x Cap
Nuts (55), Bolts (54) and Big Curve
Washers (17).
34
55
17
b.
53
54