Trouble Shooting - Everlast 16205577260 Owner's Manual

Problem
Monitor does not
display
No speed or distance
displays on the monitor
Squealing
Maintenance
The safety of this produce can be maintained only if regular periodic checks are made. Most checks can
be performed once a week. However some checks should be made before each workout, and are
indicated as such below.
Checks
 Be sure batteries are new and electronic connection are clean and tight.
 Check that seat nuts are secure, check before each workout.
 Check that pedals are tight, pedals can work loose over time.
 Check that stabilizer bolts are tight, check before each workout this.
Check that handlebar is secure, if not, tighten, check before each workout this.

 Should a part become defective, replace it immediately. Do not allow use of the equipment until it
has been repaired.
Cleaning
Almost all surfaces are washable. A damp cloth is sufficient to clean most surfaces of this unit.
Be careful not to drip water on the monitor. A mild liquid soap may be added if needed.
Always ensure batteries are fresh and in correctly.
Customer Service 1-888-707-1880
Or email customerservice@dyaco.ca

TROUBLE SHOOTING

Cause
Batteries weak or dead
Sending unit not connected
Sending unit not working
properly
Monitor not working
properly
Brake pads are worn
13
Correction
Replace batteries
Securely plug sending unit into
extension wire and the back of the
monitor
Replace sending unit
Replace monitor
Replace the brake pads
Dyaco Canada Inc.©2015