Table of Contents
Advertisement
This manual is designed to help you easily assemble, adjust and use this machine. Please read this
manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first
study the overview drawing.
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help
to identify the parts.
It will take two people to assemble your unit.
ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED AFTER EACH STEP
STEP 1
1.
Attach the front stabilizer (15) to the main frame (16). Secure using two carriage bolts (3), two flat
washers (5) and two domed nuts (6).
2.
Attach the rear stabilizer (4) to the main frame (16). Secure using two carriage bolts (3), two flat
washers (5) and two domed nuts (6).
STEP 2
1.
Release the nuts on the backside of seat (13), attach the seat (13) to sliding tube (12), and then re-
tighten the nuts.
2.
Insert the sliding tube (12) into the seat post (10). Secure using a quick release knob (7).
3.
Insert the seat post (10) into the Main frame (16). Secure using a quick release knob (7).
Note: The seat can be horizontally and vertically adjustable after your cycle is fully assembled.
Customer Service 1-888-707-1880
Or email customerservice@dyaco.ca
ASSEMBLY INSTRUCTIONS
6
Dyaco Canada Inc.©2015
Hide quick links:
Advertisement
Table of Contents
