Monitor Instruction; Computer Instructions - Everlast 16516696 Owner's Manual

BUTTONS:
▲/UP: Press to select programs P1 to P12. Press to increase the values of the
setting mode.
Press to increase the level of the workload when running a program.
▼/DOWN: Press to select programs P1 to P12. Press to decrease the values of the setting mode.
Press to decrease the level of the workload when running a program.
SET: Press to confirm the selected programs P1 to P12. Press the SET button to select the
values of the various settings.
START/STOP: Press to start the selected program. Press the START / STOP button to stop the
program.
You can press the START / STOP button again to continue to run the current program,
or use "▲ / ▼ " buttons to select a new program.
MODE: Press to select the function value displays of RPM and WATT, or SPEED and
CALORIES.
RESET: Press to reset all of the function values to zero.
FAN: Press to turn on or off, and to change the speed of the fan on the COMPUTER(27) in
sequence as follows: Low Speed → High Speed → OFF
Customer Service 1-888-707-1880
or email customerservice@dyaco.ca

COMPUTER INSTRUCTIONS

12
Dyaco Canada Inc. © 2014