Turn Signal Lamp Switch; Hazard Warning Lamp Switch - Mitsubishi Fuso FK 2010 Owner's Manual

PASS
LOW
HIGH
3 Passing signal/dimmer switch
Passing signal
Pulling the lever up activates the high beams.
Use this to flash a signal when overtaking
another vehicle.
Dimmer
With the headlamps illuminated, pushing the
lever down activates the headlamp high beams
and pulling it back to the original position reacti-
vates the low beams. When the high beams are
Z17276
on, indicator lamp

4 Turn signal lamp switch

•
Turn signal
Moving the lever forward or backward activates
the corresponding turn signal causing it to flash.
At the same time, the corresponding indicator
lamp
When the steering wheel is returned to the neu-
tral position after a right or left turn, the switch
automatically moves back to the neutral position
and the lamp stops flashing. After making a
Z17277
moderate turn, however, the switch will some-
times not return automatically. In this case, put
the switch in the neutral position by hand.
•
Lane changer
Lightly pushing the lever forward or backward
causes the corresponding turn signal lamp to
flash while the lever is held in this position.

5 Hazard warning lamp switch

The hazard warning lamps may be used as a warn-
ing to other vehicles when you suddenly find it nec-
essary to stop your vehicle in emergencies.
The lamps can flash in any of the starter switch
positions.
Pulling the lever up causes all turn signal lamps to
flash simultaneously. At the same time, indicator
lamps
another time causes the lamps to stop flashing.
Z17278
lights up.
or flashes.
start flashing. Pulling the lever
5-25