Turning On The Computer For The First Time - Commodore 64C Introductory Manual

turning on the computer for the first time
—if you are using a television set
1. MAKE SURE THAT YOU
HAVE CONNECTED THE COM
PUTER PROPERLY TO THE
TELEVISION SET.
Follow the instructions in the QUICK-
CONNECT GUIDE.
2. SET THE CHANNEL SELEC
TOR SWITCH ON THE BACK OF
THE COMPUTER.
Set the switch (marked L-H ) to either
channel 3 or channel 4—whichever is not
used in your area.
3. TURN ON THE TV SET.
4. TURN ON THE COMPUTER
The red POWER light on the top left side
of the computer then comes on and the
initial screen display appears.
—if you are using a monitor:
1. MAKE SURE THAT YOU
HAVE CONNECTED THE COM
PUTER PROPERLY TO THE
MONITOR.
Follow the instructions in the QUICK
CONNECT GUIDE.
2. TURN ON THE MONITOR.
3. TURN ON THE COMPUTER.
The small red POWER light on the top
left side of the computer then comes on
and the initial screen display appears.