Commodore 64C Introductory Manual page 32

loading cassette tape software
Follow these steps to load prepackaged
cassette tapes:
1. PLUG THE DATASSETTE
INTO THE CASSETTE PORT.
3. TYPE:
LOAD "PROGRAM NAME" \S
The screen then displays this message:
PRESS PLAY ON TAPE
The computer searches for the program.
2. INSERT THE TAPE CASSETTE.
Rewind the tape if necessary. 4. WAIT FOR THIS MESSAGE:
FOUND PROGRAM NAME
Here, PROGRAM NAME stands for the
name of the software package you are
using.
5. PRESS THE O KEY.
The program is LOADED into the com
puter. (If for some reason you decide at
this point that you want to stop the pro
gram from LOADing, just press the
RUN/STOP key.)
The program will then either start to run
by itself, or there will be instructions on
the screen telling you what to do. For
instance, some programs will tell you to
type RUN and press RETURN to start
program operation.
NOTE:
Many prepackaged cassette programs
may take several minutes to load. You will
know that loading is complete when you
see the cursor start to blink again, or
when instructions telling you how to use
the program appear on the screen.
28