Playing Back A Vhs Tape (Vcr); Tracking; Special Vcr Playback Features - Samsung DVD-VR350 Instruction Manual

■ This unit can play the following video compression formats
MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x DivX-Pro
Xvid
Motion Compensation : QPEL, GMC
Audio format : "MP3", "MPEG1 Audio Layer2", "LPCM", "AC3",
"DTS", "MS ADPCM"
■ Some MPEG4 fi les created on a personal computer may not be
play back.
That is why Codec Type, Version and Higher resolution over
specifi cation is not supported.
■ Supported subtitle fi le formats: .smi, .srt, .sub, .psb, .txt, .ass
(The subtitle fi le should have exactly the same name as the
corresponding MPEG4 fi le name)

Playing back a VHS Tape (VCR)

1. Insert a standard VHS tape into the VCR deck.
• When a videotape is inserted, power will turn on automatically.
2. Press the ► II (PLAY/STILL) button on the remote control or on the
front panel of the unit. The videotape will begin to play automatically if
the Record Safety Tab is removed and Auto Play is turned on.
3. Press the (STOP) button on the remote control or on the front panel
of the unit.
▌

Tracking

The Tracking adjustment removes the white lines that sometimes
appear during playback because of slight differences in recording
decks.
During playback, press the PROG/TRK (
lines from the picture.
▌

Special VCR Playback Features

While a videotape is playing, you can enjoy a variety of special
playback features.
Still
In Play mode, press ► II (PLAY/STILL) button to still a single frame.
Frame Advance
In the Still mode, press F.ADV/SKIP button to advance to the next frame.
Fps/Rps
In Play mode, press Forward (► ►) button or Rewind (◄ ◄) button to
Fps/Rps at two speeds:
• Picture Search - Press and release repeatedly to advance the tape
forward or backword at 2,3,5,7 times normal speed.
• Jet Search - Press and hold to advance the tape forward or backward
at 7 times normal speed.
English - 48
/ ) buttons to remove white